Dual Display Time DelayRelay Module DC 12V

Mini LED Digital Timer

Cycle Time ControlSwitch

Specifications:Voltage: DC 12V

Current: 20A

Power: < 1800w

Shell Color: White /Black

LED Display Color:Red+Green / Red+Blue

Timing Range:0999s 0999min 0999h

Dimensions: Displayboard 48x29mm; Installation 45.5x26mm

Function Setting:18kinds combination function Features:1.Double LED Display:can set two sets timing time.Timing time T1 timing time T22.Three Timing Time Chosen:0999s 0999min 0999h3.Six Operating Mode Setting0. mode:after delay T1 time relay will operate(T1 timing)1. mode:after delay T1 time relay will not operate(T1 timing)2. mode:after delay T1 time relay will operate(T1 timing);after delay T2 time relay will not operate(T2 timing) end3. mode:after delay T1 time relay will not operate(T1 timing);after delay T2 time relay wil operate(T2 timing) end4. mode:after delay T1 time relay will operate(T1 timing);after delay T2 time relay wil not operate(T2 timing) repeat cycling5. mode:after delay T1 time relay will not operate(T1 timing);after delay T2 time relay wil operate(T2 timing) repeat cyclingProduct Instructions:Please pay attention for your first use. You need wait 6s after your setting data the module will save the date you have set after 6s.Short press button SET: If you start the time setting mode Nixie tube will blink. You could adjust the time T1 and T2 by button+ and button. Please wait 5s after your setting date the module will save the date you have set after 5s .Long press button SET: if you start the parameter setting mode. There are two group parameter for your choice : P0 and P1. You could switch P0 or P1 by short press SET. Under the parameter P0 and P1 you could set the timing mode by the button+ and button.P00: Timing time mode : 0999s.P01: Timing time mode : 0999min.P02: Timing time mode : 0999h.P10: The relay will connect after you delay the T1 time .P11: The relay will disconnect after you delay the T1 time.P12: The relay will connect after you delay the T1 time first Then the relay will disconnect after you delay the T2 time it finish.P13: The relay will disconnect after you delay the T1 time first Then the relay will connect after you delay the T2 time it finish.P14: The relay will connect after you delay the T1 time first Then the relay will disconnect after you delay the T2 time it is cyclic.P15: The relay will disconnect after you delay the T1 time first Then the relay will connect after you delay the T2 time it cyclic.Example: A customer needs 10 seconds to start up and 20 seconds off. Setup is as follows:T1 set time 10 T2 set time 20P0 0 (T1 time range is seconds)P15 (timer work mode)