Gear Motor 3 224:1 90 Degree Shaft

This 224:1 gear motor is very comparable to a hobby servo for power at a fraction of the cost!

This model differs from the GM2 in that it has a 90 degree output shaft. This motor offers 48.61 in*oz of torque at 3V rotating 360 degrees every 1.5 seconds (24 rpm just a hair slower than a servo) drawing 400mA at stall (free running at 40mA).

With a 7mm doubleflat output shaft (avoid using the D output it’s not meant to take rotational load) and a builtin clutch (limiting at 60 in*oz but easily locked) and builtin mounting screw holes this is why we like these motors!

Overall dimensions are 70.1mm long x 22.3mm x 37.7mm (2.76) x (0.878) x long (1.48) including output shafts while only weighing 30.5grams or 1.08ounces.

Description: 90 Degree Motor
Gear Ratio: 224.00:1
At 3 Volts Unloaded RPM (3V): 24
Unloaded Current (3V): 40 mA
Stall Current (3V): 400 mA
Stall Torque (3V): 48.61 in*oz
At 6 Volts Unloaded RPM (6V): 46
Unloaded Current (6V): 50 mA
Stall Current (6V): 733 mA
Stall Torque (6V): 56.94 in*oz
Length (mm): 70.00 mm
Width (mm): 22.50 mm
Height (mm): 37.00 mm
Weight: 40.00 g