Designed to provide you with the greatest safety comfort quality and ruggedness when working on energized circuits these insulated long nose pliers with side cutters and gripping zones feature a nominal length of 8 (200 mm). Ideal for cutting and gripping where fingers and other tools are too big.

VDE certified and rated to 1000 V AC these insulated long nose pliers with side cutter and gripping zones are as well compliant with international standards such as IEC 60900 and ASTM F1505. The unique ergonomic yet rugged design provides extra safety and adherence to users.

Features

• Unique milled wave patter gripping zones
• 4 gripping points for pulling round objects with superior grip that won’t slip
• Added value working sensitive pieces copper tubes thread cable
• Straight halfround long and slim knurled jaws specially profiled
• Side cutting edge for wire cutting
• German CMV steel

Warranty

Fluke Insulated Hand Tool Lifetime Limited Warranty

Each Fluke Insulated Hand Tool will be free from defects in material and workmanship for its lifetime. As used herein lifetime is defined as seven years after Fluke discontinues manufacturing the product but the warranty period shall be at least fifteen years from the date of purchase. This warranty does not cover damage from neglect misuse contamination alteration accident or abnormal conditions of operation or handling damage or normal wear and tear of mechanical components. This warranty covers the original purchaser only and is not transferable.

Recommendations for use and inservice care of Fluke Insulated Hand Tools

The following is guidance concerning the maintenance inspection retest and use of Fluke Insulated Hand Tools.

Warning to avoid electrical shock or personal injury:

• Keep fingers behind the finger guards of the tool. Never touch conductive parts.
• Always wear approved eye protection.
• Do not use in wet or damp locations. Do not use unless the tool is clean and dry.
• Do not apply excessive force or stress to the tool insulation that may cause damage. Examples include using the insulated surfaces as a fulcrum to pry or wedge or gripping insulated tool handles with other tools such as pliers or wrenches to increase torque or leverage.

If the tool is used in a manner not specified the protection may be impaired.

Storage

Insulated hand tools should be properly stored to minimize the risk of damage to the insulation due to storage or transportation. These insulated hand tools should be stored separated from other tools to avoid mechanical damage or confusion with uninsulated tools. Furthermore these insulated hand tools should be prevented from contact with excessively hot surfaces (for example steam pipes) or exposure to excessive UV radiation.

Inspection before use

Before use each Insulated Hand Tool should be visually inspected by the user. If there is any doubt concerning the safety of the insulated hand tool it should be subjected to examination by a competent person and if necessary retested to determine suitability or disposed of to prevent further use.

Temperature

Insulated Hand Tools should be used only in environments having temperatures between 20 C and +70 C and for tools marked C between 40 C and +70 C.

Periodic examination and electrical retesting

An annual visual examination by a suitably trained person is recommended to determine the suitability of the Insulated Hand Tool for further service. If an electrical retest is required by national regulation or in the case of doubt after visual examination the applicable dielectric test of IEC 60900 for insulated hand tools should be performed.